{"title":"Dynaudio","description":"\u003cp\u003eDynaudio is a revered brand renowned for its premium audio products and uncompromising sound quality. Founded in Denmark in 1977, Dynaudio specializes in high-end loudspeakers, studio monitors, and automotive sound systems. With a legacy of precision engineering and innovation, Dynaudio speakers are acclaimed for their natural, detailed sound reproduction and craftsmanship. Whether for critical listening in the studio, immersive home theater experiences, or premium automotive audio solutions, Dynaudio products deliver exceptional performance and reliability. Explore the exquisite sound of Dynaudio at Magnum Sound and Vision.\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"dynaudio-confidence-60-floorstanding-speakers-pair","title":"Dynaudio Confidence 60 Floorstanding Speakers Pair","description":"\u003cp\u003eUltimate performance. Ultimate quality. Ultimate innovation. Meet the new flagship of Dynaudio’s most advanced speaker range\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSometimes size does matter. The all-new Confidence 60, the flagship of the new Confidence family, towers above the outgoing Confidence C4 model.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s unashamedly big; it’s unselfconscious hi-fi royalty. And it sounds like nothing else you’ve heard. Pull up a chair.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhile your ears are captivated by the Confidence 60’s astonishing power, scale and detail, your eyes will probably be drawn to the single Esotar3 28mm soft-dome tweeter in the middle. Then the twin 15cm MSP midrange drivers with Horizon Surrounds. And, finally to the two 23cm MSP NeoTec Woofers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe drivers are all new. And they’re all part of the next generation of our innovative DDC (Dynaudio Directivity Control) sound-shaping technology platform. This focuses the sound waves radiating from the speakers into a tight vertical ‘beam’ that avoids reflections from floors and ceilings while maintaining a wide horizontal image. That means a bigger sweet-spot on the couch, a happier audience, and the knowledge that you’re only hearing what the drivers are producing – and not what the room itself is bringing to the party.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe star of the show is the DDC Lens – a machined aluminium waveguide integrated into the precision Compex composite baffle. This ingenious part (the result of hundreds of hours of simulations, prototyping and listening tests) works in conjunction with the baffle shape, the tweeter and the midrange drivers (notice their brand-new Horizon Surround, also part of the system) and the woofers to focus sound waves where they need to go: you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn fact, everything in the Confidence 60 is designed precisely for that purpose. Even the gasket that decouples the baffle from the cabinet, and the screws that hold everything in place.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe brand-new Esotar3 28mm soft-dome tweeter takes over 40 years of Dynaudio expertise, plus plenty of new learnings from development of the award-winning Esotar Forty unit – and rolls it all into the finest tweeter we’ve ever created. A powerful neodymium magnet system, innovations in airflow routing, the new resonance-busting Hexis inner dome … it all combines to increase detail, clarity and sensitivity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new 23cm NeoTec MSP woofers also have neodymium magnets under the hood, and use three layers of glass-fibre in their voice-coil formers for optimum stiffness. The voice-coils themselves are copper (which provides extra moving mass for tighter, more powerful and more controlled bass in this specific driver design). And the entire woofer motor has been designed to harness airflow using an innovative new venting system that’s been machined directly into the magnet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Confidence 60’s brand-new MSP midrange drivers are a big departure from previous Dynaudio designs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey use a radical surround design – the Horizon – that follows the cone’s shape right to the edge of the driver. This reduces the surround’s first resonant mode to effectively increase the whole playing surface area and improve performance. They also sit flush with the baffle to reduce diffractions from the diaphragm and the adjacent tweeter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBehind the scenes, the basket has been given a new lightweight organic design – one that’s resulted from extensive topology-optimisation simulations. It increases airflow, maintains its stability and rigidity and reduces weight simultaneously without sacrificing performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd it’s all finished in our trademark Danish-designed furniture-grade cabinetry. Perfect performance, perfect quality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Smoke","offer_id":45717964718366,"sku":"959682","price":81999.0,"currency_code":"NZD","in_stock":true},{"title":"Ruby","offer_id":45717964751134,"sku":"959674","price":81999.0,"currency_code":"NZD","in_stock":true},{"title":"Midnight","offer_id":45717964816670,"sku":"959681","price":81999.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde","offer_id":45717964849438,"sku":"959604","price":81999.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioConfidence60_smoke_halfprofile.webp?v=1691669915"},{"product_id":"dynaudio-confidence-50-floorstanding-speakers-pair","title":"Dynaudio Confidence 50 Floorstanding Speakers Pair","description":"\u003cp\u003eWith great power comes great responsibility. That’s why these large floorstanders are just as adept at shaking the room as they are reproducing the finest of details\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe all-new Confidence 50 stands shoulder-to-shoulder (or baffle-to-baffle) in height with the Confidence C4 – the previous flagship of the range.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike that legendary speaker, it’s a three-way design with twin woofers and twin midrange drivers. It’s stunningly constructed. Stunningly finished. And a stunning performer. It uses DDC (Dynaudio Directivity Control) technology to form a sound ‘beam’ that avoids reflections from floors and ceilings. And it features an Esotar tweeter and MSP woofers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut it takes all of this – every single component – to a new level of performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou might notice that while the previous Confidence floor-standers used two tweeters, the new Confidence 50 has just one. That’s because the engineers toiling away in Dynaudio Labs have discovered new ways to optimise crossovers, waveguides and baffles to create a much simpler, better-performing version of the DDC platform. (Peek behind the curtain and see how we decided to go with one tweeter instead of two in our six-part podcast series on Confidence).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt all centres on the new DDC Lens – the stunning precision-machined waveguide around the brand-new Esotar3 tweeter (we think you’ll agree that’s a mouth-watering combination right there). The DDC Lens has been simulated and topology-optimised to vertically focus the tweeter, midrange drivers and woofers on the listening position. That results in dramatically reduced reflections from floors and ceilings – which means you hear exactly what the driver system, and not the room, is doing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new 28mm Esotar3 soft-dome tweeter takes over 40 years of Dynaudio expertise, plus plenty of new learnings from the award-winning Esotar Forty unit – and rolls it all into the finest tweeter we’ve ever developed. A powerful neodymium magnet system, innovations in airflow routing, the new resonance-busting Hexis inner dome … it all combines to increase detail, clarity and sensitivity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new 18cm NeoTec MSP woofers also have neodymium magnets under the hood, and use glass-fibre in their voice-coil formers for optimum stiffness. The voice-coils themselves are copper (which provides extra moving mass for tighter, more powerful and more controlled bass in this specific driver design). And the entire woofer motor has been designed to harness airflow using an innovative new venting system that’s been machined directly into the magnet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Confidence 50’s brand-new MSP midrange drivers are a big departure from previous Dynaudio designs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey use a radical surround design – the Horizon – that follows the cone’s shape right to the edge of the driver. This reduces the surround’s first resonant mode to effectively increase the whole playing surface area and improve performance. They also sit flush with the baffle to reduce diffractions from the diaphragm and the adjacent tweeter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBehind the scenes, the basket has been given a new lightweight organic design – one that’s come from extensive topology-optimisation simulations. It increases airflow, maintains its stability and rigidity and reduces weight simultaneously without sacrificing performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEverything is held securely in place in the ultra-rigid, super-damped and acoustically inert Compex composite baffle. It echoes the design of previous Confidences – but brings the look up to date in aesthetics and acoustic principles. That’s because it forms an integral part of the DDC Lens system, as well as providing perfect coupling and decoupling of the drivers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDown below is the bass port . You won’t see it; it sits under the speaker. And because it fires downwards, we’ve been able to design it to perform exactly as we want it to without having to worry about putting a big hole in the beautiful finish.\u003c\/p\u003e\n\u003cp\u003eAnd, honestly, you have to hear it to believe it…\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Smoke","offer_id":45717964882206,"sku":"959482","price":54749.0,"currency_code":"NZD","in_stock":true},{"title":"Ruby","offer_id":45717964914974,"sku":"959474","price":54749.0,"currency_code":"NZD","in_stock":true},{"title":"Midnight","offer_id":45717964980510,"sku":"959481","price":54749.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde","offer_id":45717965013278,"sku":"959404","price":54749.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioConfidence50_smoke_halfprofile.webp?v=1691669806"},{"product_id":"dynaudio-confidence-30-floorstanding-speakers-pair","title":"Dynaudio Confidence 30 Floorstanding Speakers Pair","description":"\u003cp\u003eNext-generation DDC sound-beaming technology leads the way in the smallest of the all-new Confidence floor-standers\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe tricky thing about producing the best is that at some point you have to beat it. The good thing is that when you’re working with the team that created the original, the job becomes easier – and more fun.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSo, when the new Confidence 30 three-way floor-stander rolled out of Dynaudio Labs in Skanderborg, there was much rejoicing. It tips an affectionate nod to Confidence models past while taking their innovations and their performance to the next level.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike the rest of the range, the Confidence 30 features the brand-new Esotar3 tweeter . This takes lessons learned during the development of the award-winning Esotar Forty anniversary tweeter – including optimised airflow technology, a new neodymium magnet design and the ingenious Hexis resonance-busting inner dome – and takes things up a notch or three.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAlso on board are two all-new 18cm NeoTec MSP woofers (which also feature powerful neodymium magnet systems and some intensely clever airflow tech); the new, ultra-stable, ultra-rigid Compex composite front baffle; a completely new 15cm midrange driver with the new airflow-correcting Horizon Surround ; the new down-firing bass port … and the next generation of the DDC (Dynaudio Directivity Control) sound-beaming technology, including the brilliant DDC Lens around the tweeter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll the Confidence 30’s components (even the screws and gaskets that hold the baffle in place) work in perfect harmony as part of the DDC platform to vastly reduce floor and ceiling reflections while maintaining an accurate horizontal image. It means you can place the speakers in a larger space without needing room treatment, special rugs or ceilings or… well, anything. It just works. (Something you can learn more about in our six-part podcast series on the new Confidence).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Smoke","offer_id":45717965078814,"sku":"959282","price":38999.0,"currency_code":"NZD","in_stock":true},{"title":"Ruby","offer_id":45717965111582,"sku":"959274","price":38999.0,"currency_code":"NZD","in_stock":true},{"title":"Midnight","offer_id":45717965177118,"sku":"959281","price":38999.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde","offer_id":45717965209886,"sku":"959204","price":38999.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioConfidence30_midnight_halfprofile.webp?v=1691669678"},{"product_id":"dynaudio-confidence-20-standmount-speakers-includes-stand-pair","title":"Dynaudio Confidence 20 Standmount Speakers Includes Stand Pair","description":"\u003cp\u003eWe don’t think a speaker’s size should dictate how good it sounds… so we don’t let it\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe compact Confidence 20 takes the performance, the passion and the power of the range’s larger speakers, and puts it on a stand.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve spent years looking at how we could improve on the previous range of Confidence speakers. And, after almost countless hours in design labs, our state-of-the-art Jupiter measuring facility, modelling and simulation suites – and, of course, listening rooms – we’ve done it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike the rest of the range, the Confidence 20 features the all-new 28mm Esotar3 soft-dome tweeter, plus a new 18cm NeoTec MSP woofer and an innovative down-firing bass port. Its drivers feature cutting-edge developments in airflow technology (including a much larger rear chamber and optimised venting in the tweeter, plus the new resonance-stabilising Hexis inner dome); simulation-derived diaphragm thickness; super-powerful neodymium magnets; and the new Compex front baffle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new 28mm Esotar3 soft-dome tweeter takes over 40 years of Dynaudio expertise, plus plenty of new learnings from the award-winning Esotar Forty unit – and rolls it all into the finest tweeter we’ve ever created. A powerful neodymium magnet system, innovations in airflow routing, the new resonance-busting Hexis inner dome… it all combines to increase detail, clarity and sensitivity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new 18cm NeoTec MSP woofer also has neodymium under the hood, and uses glass-fibre in its voice-coil former for optimum stiffness. The voice-coil itself is aluminium, which lets us use the ideal weight (or lightness, depending on your point of view) for powerful and controlled bass as well as refined midrange. And the entire woofer motor has been designed to harness airflow using an innovative new venting system that’s been machined directly into the magnet. We’re guessing you want to know how it sounds… and the answer is, simply, “like your favourite artist”. Nothing more, nothing less.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Smoke","offer_id":45717965242654,"sku":"959182","price":21499.0,"currency_code":"NZD","in_stock":true},{"title":"Ruby","offer_id":45717965275422,"sku":"959174","price":21499.0,"currency_code":"NZD","in_stock":true},{"title":"Midnight","offer_id":45717965340958,"sku":"959181","price":21499.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde","offer_id":45717965373726,"sku":"959104","price":21499.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioConfidence20_midnight_halfprofile.webp?v=1714568006"},{"product_id":"dynaudio-contour-25ci-center-speaker-single","title":"Dynaudio Contour 25Ci Center Speaker Single","description":"\u003cp\u003eThe ideal companion to our upright Contours. The Contour 25Ci seamlessly integrates for an awesome surround-sound performance\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s been said that sound accounts for as much as 80 per cent of the moviegoing experience. And we can’t argue with that (musicals, especially, don’t have quite the same impact with the volume set to zero).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s why we created the Contour 25Ci centre-channel. Mix and match it with a combination of Contour 20i, 30i and 60i for a seamlessly integrated multichannel system – a system on which you know you’ll be able to enjoy stereo music as much as you will a teeth-rattling blockbuster.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy? Because it’s essentially a Contour 30i turned on its side, with the tweeter moved to the middle. The super-detailed Esotar2i soft-dome unit – which now includes the new resonance-defeating Hexis inner dome and a larger rear chamber – is flanked by a pair of 18cm MSP drivers – all of which use the same high-end lightweight aluminium voice-coils and (in the tweeter) magnetic ferrofluid technology as the rest of the Contour range.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThose mid\/bass drivers are exactly the same as you’ll find in Contour 20i and 30i – complete with the asymmetrical new aramid spider – for total consistency around your system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur loudspeakers are used in music and movie production studios all over the world – so we know how crucial it is to reproduce multichannel sound to its fullest potential.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd if you’re investing time in watching a movie (or even a TV show), you want that experience to be as clear, dynamic, assured and powerful as it can be. Most of the speech information comes out of the centre-channel, which is why Contour 25Ci’s combination of legendary materials and balanced, neutral sound is so ideal.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s why the Contour 25Ci doesn’t compromise. All the knowledge, care and enthusiasm that goes into our upright speakers is here, too. The finish is furniture-grade; the materials top-quality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you want a companion or an upgrade for your existing Dynaudio system, this is it.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Nordic Silver","offer_id":45717965406494,"sku":"972592","price":6799.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717965439262,"sku":"972576","price":6799.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut","offer_id":45717965504798,"sku":"972501","price":6799.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-contour-25ci-center-channel-1730.jpg?v=1691468089"},{"product_id":"dynaudio-contour-60i-floorstanding-speakers-pair","title":"Dynaudio Contour 60i Floorstanding Speakers Pair","description":"\u003cp\u003eIf you have a bigger listening room – or if you just like to play it loud – the Contour 60i, with its unique midrange driver, is your new best friend\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContour 60i sounds bigger than you’d think. Yes, we mean that…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd it isn’t just because it’s a grown-up, full-size, three-way floorstander. Of course it’s capable of outright, neighbour-infuriating volume. It sounds big in other ways too – from the soaring soundstage of a top orchestral recording to the caffeinated surround-sound effects in a movie, Contour 60i simply fills the room – without resorting to bass-heavy bombast along the way.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eStarting at the top, you’ll find the jewel in the crown: the all-new Esotar 2i tweeter. We looked at the older Esotar 2 from the 2016 Contour, took it apart and realised we could give it a boost with some tech from our flagship Confidence range (the Hexis) and also our flagship Core professional reference monitor series (the larger rear chamber). Together these clever mods help to reduce unwanted resonances and smooth out the frequency response for even clearer treble performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContour 60i is the only model in the family to have a dedicated midrange driver. It uses an aluminium voice-coil, and also has a neodymium magnet system – all developed and optimised at the Dynaudio Labs in Denmark. It is, in fact, exactly the same midrange driver we used in the 2016 Contour 60. If it ain’t broke…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhere the difference lies is in how it’s mounted. We’ve used more tech from Core here, isolating it in a precision-moulded cup containing resonance-defeating ribs. If there’s one thing you can never have too much of, it’s midrange clarity – and Contour 60i now has even more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe two woofers are new. Each has a bigger magnet system, a different voice-coil design and a glass-fibres voice-coil former, as first used in the Confidence range and Sub 6 subwoofer. That means even tighter bass, at higher volume. We’ve chosen copper for these ones over aluminium. Why? Because they’re dedicated bass drivers. Copper is heavier and provides more moving mass. More moving mass lets us dig deeper without impinging on the midrange, handled by the super-sprightly driver just above.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe crossover is brand-new, too. You can’t change all the drivers without taking a look at the speaker’s ‘brain’, after all. Plus, the effect of that moulded midrange cup and the Nomex woofer spiders let our engineers shift the crossover frequency up. It now works better at slightly higher frequencies (up to around 300Hz). The frequency curve in this area is also flatter, meaning better midrange performance from a simpler design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe multi-layer curved cabinet and sleek-but-solid aluminium baffle provide your music (which was likely mixed using Dynaudio studio speakers, too) with a robust, defined acoustic foundation. So much so that, if we’ve done our jobs right, you’ll forget they’re even there and just ... listen.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Nordic Silver","offer_id":45717965537566,"sku":"976092","price":19499.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717965570334,"sku":"976076","price":19499.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut","offer_id":45717965603102,"sku":"976001","price":19499.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-contour-60i-floorstanding-speakers-a68898.jpg?v=1691468170"},{"product_id":"dynaudio-contour-30i-floorstanding-speakers-pair","title":"Dynaudio Contour 30i Floorstanding Speakers Pair","description":"\u003cp\u003eGo back to a time when all that mattered was the next track on the album\u003c\/p\u003e\n\u003cp\u003eContour 30 steps it up a notch from the 20. Of course, it still treads the same path – one of honesty, transparency and sheer entertainment, but it puts it all in a bigger package.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike the rest of the new Contour i family, the 30i has the all-new Esotar 2i tweeter – complete with the Hexis inner dome found throughout our flagship Confidence range and also in the Core series of professional studio reference monitors (trickle-down tech is an amazing thing, isn’t it…). Esotar 2i also gets a new, larger rear chamber. This, together with Hexis, helps to reduce unwanted resonances and smooth out the frequency response for even clearer, sweeter high-frequencies.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve endowed Contour 30 with two 18cm MSP drivers, as well as doubling up on the rear ports. Behind the scenes we’ve tweaked the spider suspension (the springy ring that keeps the woofer in the right place when it’s at rest, and controls it in the right way when it’s moving). This one is made from aramid fibres, and retains the ingenious structural properties from before (the ribs are of varying width to give even finer control over the cone’s excursion).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContour 30i continues to use aluminium voice-coils, too. We can make them extremely light – but also bigger than the old-style copper units you’ll find elsewhere. Lighter weight allows larger diameters with more windings, yet low weight, which means we have more control over the cone movement. And that means more control over the sound – especially at high frequencies and high volumes – exactly what you need in a mid\/bass driver. Sure, we experimented with small voice-coils on the new Contour – the size other companies might use. The measurements said they should work for Contour. Our ears said otherwise, so we went big. Our ears were right.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd, as with Contour 20i, the flatter frequency response from the improved tweeter and mid\/bass drivers means we’ve been able to simplify the crossover. Not that it wasn’t elegant before – but now… well, we’ll let you judge.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe improved crossover no longer needs impedance correction circuitry to optimise its performance – that’s all now done in the driver itself, simply down to the physical properties of the materials we use. Fewer components, cleaner signal path, better performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhile our engineers and designers were hunkered down listening to everything from jazz, to classical, to metal, to electronica, the team in our on-site factory were scouring sustainable sources for high-quality materials and finishes. They make sure all Contours are furniture-grade: perfectly built, perfectly finished and perfectly packaged\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Nordic Silver","offer_id":45717965635870,"sku":"973092","price":15749.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717965668638,"sku":"973076","price":15749.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut","offer_id":45717965701406,"sku":"973001","price":15749.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-contour-30i-floorstanding-speakers-a68890.jpg?v=1691468110"},{"product_id":"dynaudio-contour-20i-standmount-speakers-pair","title":"Dynaudio Contour 20i Standmount Speakers Pair","description":"\u003cp\u003eHear the difference: the new Contour 20i is ready to blow your sonic socks off\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new Contour 20i has been designed to surpass every other standmount Contour model we’ve created. And it succeeds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe new Esotar 2i tweeter is a turbocharged version of the much-loved Esotar2. It now features a larger rear chamber for more effective damping, and the inventive Hexis inner dome seen on Confidence, Core and more. Together they flatten the frequency response and reduce unwanted resonances for even clearer, smoother treble.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe woofer has been tweaked, too. It’s still made of our own Magnesium Silicate Polymer (MSP) material, of course, it’s still powered by a lightweight aluminium voice-coil, and it still uses a vented dual-ferrite magnet system – but behind the distinctive black cone lurks a brand-new spider suspension. This one is made from aramid fibres, and retains the ingenious structural properties from before (the ribs are of varying width to give even finer control over the cone’s excursion). You’d be surprised at the sonic difference such a small change can make…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd because those driver changes provide an inherently flat frequency response, we’ve been able to simplify the crossover too. It’s a thing of beauty, isn’t it? There’s no longer any need for extra impedance-correction circuitry – which means an even more direct signal path. And cleaner sound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMaking a Contour without its signature baffle would be like making a car without wheels. Unthinkable. But there’s always room for improvement – and our designers love to stretch their legs. This baffle is aluminium, and set into the cabinet. Its chamfer is included in the driver’s basket – which not only looks great, but also reduces unwanted high-frequency diffraction effects for clearer treble, and provides a solid foundation for the drivers to do their work. A solid foundation means improved high-volume performance at low frequencies, too (although your neighbours might not thank us for that).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEven the internal damping is brand-new – using lessons learned from Evoke and Confidence.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Nordic Silver","offer_id":45717965766942,"sku":"972092","price":9799.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717965799710,"sku":"972076","price":9799.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut","offer_id":45717965832478,"sku":"972001","price":9799.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-contour-20i-bookshelf-speakers-a68881.jpg?v=1691468028"},{"product_id":"dynaudio-evoke-25c-center-speaker-single","title":"Dynaudio Evoke 25C Center Speaker Single","description":"\u003cp\u003eGoing to the movies is much better at home. You don’t have to queue, the floor isn’t sticky, and you don’t get charged through the nose for snacks. Plus, you can create a far superior audio experience. But for that, you need a centre channel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDirector Danny Boyle said that sound makes for 70-80 per cent of the movie-going experience. And when you’re watching a film, the majority of that 70-80 per cent is reproduced by the centre channel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 25C is a dedicated centre speaker designed to integrate perfectly with any and all other speakers in the Evoke family – so you can bathe your ears in high-quality stereo just as effectively as you can shake the fillings out of your teeth with a summer blockbuster.\u003c\/p\u003e\n\u003cp\u003eThe two-way design has one 28mm soft-dome tweeter and twin 14cm long-throw woofers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll-new Cerotar tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLike the rest of the Evoke range, the tweeter is the brand-new Cerotar. It’s based on key technologies from our award-winning Esotar Forty anniversary tweeter, and the mighty new Esotar3, which you’ll find in the top-of-the-line Confidence series.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike all Dynaudio tweeters, it uses a precision-coated soft dome. This coating is applied in exactly the correct places and thicknesses to optimise high-frequency performance – it’s a process derived from our most exclusive speakers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut that’s where the similarity to everything except Confidence ends. Hidden behind the dome is a part called the Hexis: a special inner dome that shapes airflow to smooth-out the frequency response and eliminate unwanted resonances that would affect high-frequency performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Cerotar tweeter is powered by a new strontium carbonate Ferrite+ ceramic magnet for increased sensitivity, improved detail resolution and a natural, dynamic response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s all a posh way of saying “even if you’re watching one of those box-sets that lasts for nine hours, your ears won’t get tired”. Which, of course, is exactly as it should be.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew woofer technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke 25C’s twin 14cm Esotec+ mid\/bass drivers are made from MSP (Magnesium Silicate Polymer), a material we’ve been using for our woofer diaphragms since the dawn of Dynaudio. It provides exactly the right combination of lightness, stiffness and damping to balance the needs of precise bass performance with clear, detailed midrange.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach speaker cone is crafted from a single piece of MSP. This makes them exactly the right amount of rigid – and means far less physical distortion when they’re playing. It also gives a super-solid physical connection to the glass-fibre voice-coil former on the back (it’s glued directly under the Balance Ribs you’ll see around the centre), which means more of the coil’s motion energy is transferred to the diaphragm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe 38mm voice-coils themselves are made from aluminium, making them extremely light. That means we can use more windings. More windings gives us more control over the cone’s movement, which means more control over the sound – even at high volumes and high frequencies. That’s especially important in a centre speaker, which predominantly deals with speech – its midrange performance has to be absolutely top-notch.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe woofer motor is kept stable, centred and true by the Nomex spider (the circular spring assembly that stops the cone moving when it shouldn’t, and lets it move when it should), while the new Contour-derived surround allows a longer throw ratio for greater punch. And, like the Cerotar tweeter, the woofers are both driven by ceramic Ferrite+ magnets for greater control, finesse and power.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn non-speaker-designer language, that means “you’ll hear your movie the way it was meant to be heard”. No rough edges, nothing standing out where it shouldn’t – and nothing relegated to a cameo when it should be the lead.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for (home) movies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur design department took drew inspiration from show-homes, home-interiors stores and real-life dwellings in Denmark to hone Evoke 25C’s look. After all, it’s as much a piece of furniture as the couch you sit on to watch your movies.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s why the four finishes are so relatable. You can choose from Black High Gloss and White High Gloss (which both use new lacquering techniques for a stunning glass-like surface), as well as the warm and organic open-veneered Walnut Wood and Blonde Wood styles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe cabinet is tapered and rounded in a nod to the Contour and Confidence ranges, while the mounting screws are hidden behind stylish one-piece trim rings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike a great movie, a great design doesn’t age. Evoke 25C will stay as timeless and thrilling as the classics you’re playing through it.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717966061854,"sku":"907477","price":2549.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717966094622,"sku":"907476","price":2549.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717966127390,"sku":"907404","price":2549.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717966160158,"sku":"907401","price":2549.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-evoke-25c-center-channel-a68932.jpg?v=1691468614"},{"product_id":"dynaudio-evoke-50-floorstanding-speakers-pair","title":"Dynaudio Evoke 50 Floorstanding Speakers Pair","description":"\u003cp\u003eIf a pair of Evoke 50s in a room doesn’t say “statement of intent”, we don’t know what does. Use them in stereo. Use them as part of an Evoke multi-channel home cinema system. However you listen to them, the word ‘epic’ won’t be far from your lips.\u003c\/p\u003e\n\u003cp\u003eEvoke 50 is a full three-way floorstander with a 28mm soft-dome tweeter, a 15cm neodymium midrange driver and twin 18cm woofers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCome in on a high note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke 50 features Dynaudio’s newest tweeter: Cerotar. It’s a brand-new, ground-up design that uses key technologies from the award-winning Esotar Forty anniversary tweeter, the awesome new Contour series and the all-singing, all-dancing tech-fest that is the all-new Confidence. Our engineers are very proud of it. As well they should be.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eJust underneath the precision-coated dome sits an inner dome: the Hexis. This ingenious device is close enough to the back of the diaphragm that it stops unwanted resonant frequencies reflecting back to the rear of the playing surface. It smooths out the frequency response for clearer, cleaner, sweeter treble – meaning more detail, and more of those “hey, I don’t remember there being a triangle in this piece of music!” moments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Cerotar is powered by a brand-new strontium carbonate Ferrite+ ceramic magnet system. That gives it more sensitivity, which, in musical terms, translates simply to ‘honesty’. You’ll hear just what you’re supposed to hear. And because it’s so smooth and natural, you can listen for hours without getting tired.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBig bottom\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDown at the bottom are two 18cm Esotec+ woofers. Like the Cerotar tweeter, they use trickle-down technology from the Contour and Confidence families to bring as much of that high-end DNA to Evoke as possible.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe woofers are made from our own proprietary material, MSP (Magnesium Silicate Polymer). We’ve been using it in our cones for decades – and we’ve yet to find anything that gives a better balance of lightness, stiffness and damping. If it ain’t broke…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut while the Evoke 20 standmount speaker uses aluminium in its 18cm woofer, Evoke 50 uses copper. That’s because these are pure bass drivers – they don’t need the fleet-footed agility of a dedicated midrange unit, so we were able to give them more moving mass. The 0.4mm diaphragm is the same, though, as is the Ferrite+ ceramic magnet. That means power and detail. It’s just one of the solutions arrived at through extensive analysis and simulation in our Jupiter measuring facility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach speaker cone is crafted from a single piece of MSP. This makes them exactly the right amount of rigid – and means far less physical distortion when they’re playing. It also gives a super-solid physical connection to the glass-fibre voice-coil former on the back (it’s glued directly under the Balance Ribs you’ll see around the centre), which means more of the coil’s motion energy is transferred to the diaphragm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNomex spiders keep everything centred and moving the way it should, while the new Contour-derived surround allows a longer throw ratio for greater punch.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd, for extra versatility – if you rearrange your room or move house, for example – the rear-firing bass ports have two-part foam plugs. They offer three levels of tuning: fully open, half-open and fully closed, so you can tailor the speakers’ bass performance to their position and your room.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated midrange\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke 50 is the only speaker in the family to have a dedicated midrange driver, so the engineers in Dynaudio Labs decided to make it a little bit special. The 15cm unit they chose is derived directly from the high-end Contour range – which means a powerful neodymium magnet, a 0.4mm-thin diaphragm and a glass-fibre voice-coil former with a trademark Dynaudio aluminium voice-coil.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy neodymium and not the Ferrite+ of the woofers? Because it’s light, and it’s powerful. Why aluminium and not copper? Again, because it’s light (and lets us put more windings in the voice-coil for a given weight). That’s a combination that gives our team amazing control over how the driver responds – they were able to fine-tune it to integrate perfectly with the woofers and tweeter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn fact, the Evoke team did such a good job that you essentially are getting Contour-level performance out of this midrange driver.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple, honest style\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCreating a speaker this large without making it seem bulky and boxy is no mean feat – but lead designer Louise Dalgaard met the challenge head on. And then she knocked it out of the park. Evoke 50 was the first in the range to be committed to paper (and then to 3D modelling program, to clay model, to full MDF prototype and finally to The Real Thing).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLouise and her team were adamant that Evoke 50 had to be realistic for real homes and real lives. They drew inspiration from furniture designers, interior-design showcases, show homes, and even sniffed around real-life dwellings to get the look just right.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe result is an instant classic. It’s modern, retro, timeless and cutting-edge all at once. It’s the kind of speaker you’ll still be looking at in 30 years, and thinking to yourself that it makes the rest of your belongings look a little humdrum by comparison.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 50 is available in four beautiful finishes. Black High Gloss and White High Gloss both use a new lacquering technique that gives a gloriously deep, glass-like look. At the other end of the tactile spectrum are the lovely open natural veneers of Walnut Wood and Blonde Wood.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlug them in and rediscover your love of music.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717966225694,"sku":"907577","price":9399.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717966258462,"sku":"907576","price":9399.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717966291230,"sku":"907504","price":9399.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717966323998,"sku":"907501","price":9399.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-evoke-50-floorstanding-speakers-a68948.jpg?v=1691468729"},{"product_id":"dynaudio-evoke-30-floorstanding-speakers-pair","title":"Dynaudio Evoke 30 Floorstanding Speakers Pair","description":"\u003cp\u003ePut a pair of floorstanders in your living room and even the least ‘hi-fi’ person in the world will know you mean business. Put a pair of Evoke 30 floorstanders in there and they’ll also know you have taste.\u003c\/p\u003e\n\u003cp\u003eThese two-and-a-half-way speakers strike the balance between compactness and restraint, and unabashed, wide-eyed enthusiasm for music.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLet’s take it from the top\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the head of the table is the all-new Cerotar 28mm precision-coated soft-dome tweeter. And it’s one of our most sophisticated yet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur engineers plundered some of our most celebrated technologies – including ingenious airflow systems from the award-winning Esotar Forty anniversary tweeter, the precision coating found on the Contour range and the Hexis from the new Confidence series (more on that in a bit) – and combined them into a new design specifically for the Evoke family.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Cerotar is driven by a newly-designed strontium carbonate Ferrite+ ceramic magnet system, and features the Confidence’s headline-grabbing Hexis inner dome. This ingenious little dimpled device sits right behind the soft tweeter diaphragm and reduces unwanted resonances while smoothing out the overall frequency response. The result is sweeter treble, better detail and even more clarity – and that means you can listen into the wee hours of the morning without fatigue.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe low-down on woofers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke 30’s twin 14cm Esotec+ mid\/bass drivers are made from MSP (Magnesium Silicate Polymer), a material we’ve been using for our woofer diaphragms since Dynaudio started back in 1977. It provides exactly the right combination of lightness, stiffness and damping to balance the needs of powerful yet precise bass performance with clear, detailed midrange.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach speaker cone is made from a single piece of MSP. This makes them exactly the right amount of rigid – and means far less physical distortion when they’re playing. It also gives a super-solid physical connection to the glass-fibre voice-coil former on the back (it’s glued directly under the Balance Ribs you’ll see around the centre), which means more of the coil’s motion energy is transferred to the diaphragm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 30's 52mm voice-coils are made from aluminium – which provides the correct mix of weight and winding height to balance bass and midrange frequencies. It gives optimum moving mass while retaining the right grip of midrange performance for a perfectly integrated performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNomex spiders keep everything centred and moving the way it should, while the new Contour-derived surround allows a longer throw ratio for greater punch. And, like the Cerotar tweeter, Evoke 30’s woofers are both driven by ceramic Ferrite+ magnets for greater control, finesse and power.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn non-speaker-designer language, that means “you’ll hear your music the way it was meant to be heard”. No rough edges, nothing standing out where it shouldn’t – and nothing relegated to a supporting act when it should be headlining.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTimeless Danish design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke has been created for real life. Our designers’ priority was to make the whole family look great in any listening environment. They took models and prototypes home and sat with them, went and scoured interior-design stores and specialist furniture retailers and even sniffed around real houses to gain inspiration.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 30 is available in four fantastic finishes. Black High Gloss and White High Gloss both use a new lacquering technique that gives a gloriously deep, glass-like look. At the other end of the tactile spectrum are the lovely, natural open veneers of Walnut Wood and Blonde Wood – honest, organic and hygge.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe result is an instant classic. It’s modern, retro, timeless and cutting-edge all at once. It’s the kind of speaker your kids will eye-up expectantly when they’re leaving for university.\u003c\/p\u003e\n\u003cp\u003eWe’ll forgive you for hanging on to them yourself instead. We would…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand-new Cerotar tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 28mm precision-coated soft-dome design derived directly from the award-winning Special Forty and the mighty new Confidence series. The new motor system uses strontium carbonate Ferrite+ ceramic magnets for improved sensitivity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Hexis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn ingenious inner tweeter dome that further smooths out the tweeter’s frequency response and minimises resonances – so all you get are the desirable ones. You’ll also find Hexis in the all-new Confidence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Esotec+ woofers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNew long-throw designs for improved frequency response and low-frequency dynamics. They’re all made from MSP – a material we developed in-house and have used in our high-quality drivers for decades.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717966356766,"sku":"907377","price":6799.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717966389534,"sku":"907376","price":6799.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45718545924382,"sku":"907304","price":6799.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45718545989918,"sku":"907301","price":6799.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-evoke-30-floorstanding-speakers-a68940.jpg?v=1691468706"},{"product_id":"dynaudio-evoke-20-bookshelf-speakers-pair","title":"Dynaudio Evoke 20 Bookshelf Speakers Pair","description":"\u003cp\u003eIt’s true that you can’t have too much of a good thing. Try as you might, some good things just won’t fit in your living room – but Evoke 20 will.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 20 is a full-size stand-mounted speaker designed for almost any sized space. Its powerful 18cm mid\/bass driver ensures it can flex its muscles when there’s heavy lifting to be done, while its 28mm soft-dome tweeter takes care of the fine detail. And, of course, its Danish design looks fantastic wherever you put it. It’s an ideal match.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 20 has been designed by people who love music. They’ve crafted it from hundreds of hours of intensive measuring and listening – real listening, to real music, in real rooms. So when you play your collection, you know you’re hearing what they heard… something new.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced driver technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.4mm thick, 18cm Esotec+ woofer is made from MSP (Magnesium Silicate Polymer), a proprietary material that we’ve been using in our speaker cones for decades. It provides the perfect balance of lightness, stiffness and damping that, combined with its new strontium carbonate Ferrite+ ceramic magnet system, reproduces midrange and bass frequencies in perfect balance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe whole diaphragm is made from one piece of MSP. Rather than gluing on a dust cap or just leaving a hole, this construction makes the cone far more rigid – and means far less physical distortion. It gives a much better physical connection to the voice-coil, which means more of the coil’s motion energy is transferred to the diaphragm via the Balance Ribs around the centre.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvoke 20’s 52mm voice-coil is made from aluminium. We chose that over copper for this speaker because it gives the correct balance of weight and winding height to give bass frequencies power and enough mechanical and electrical damping, while also letting midrange frequencies (where a vast amount of musical detail lies) sing through clearly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA Nomex spider keeps everything centred and moving the way it should, while the new, seamless Contour-derived surround allows a longer throw ratio for greater power and punch.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe all-new Cerotar tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tweeter is brand new. It’s called Cerotar, and is based on key technologies from our award-winning Esotar Forty anniversary tweeter and the mighty new Esotar3, which you’ll find in the top-of-the-line Confidence series.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike all our other tweeters, it’s a 28mm unit and uses a precision-coated soft dome. This coating is applied in exactly the correct places and thicknesses to optimise high-frequency performance – it’s a process derived from the development of our most exclusive speakers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut that’s where the similarity to everything except Confidence ends. Hidden behind the dome is a part called the Hexis: a special inner dome that shapes airflow to smooth-out the frequency response and eliminate unwanted resonances that would affect high-frequency performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs with the Esotec+ woofer, it’s driven by a new strontium carbonate Ferrite+ ceramic magnet for increased sensitivity, improved detail resolution and a natural, dynamic response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s all a posh way of saying “it sounds really sweet, and you can listen to it for hours without even a hint of fatigue”. Time to get those prog-rock quadruple gatefold albums out of the attic…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA design for life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur design department took field trips to show-homes, home-interiors stores and real-life dwellings in Denmark to hone Evoke 20’s look. It was important for them to be able to imagine the speakers in a variety of living spaces – because, after all, that’s how most people listen. They’re on a couch, with a coffee, and a dog… these speakers had to be hygge.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat’s why the four finishes are so relatable. You can choose from Black High Gloss and White High Gloss (which both use new lacquering techniques for a stunning glass-like surface), as well as the warm and organic open-veneered Walnut Wood and Blonde Wood styles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe cabinets themselves are tapered and rounded in a nod to the Contour and Confidence ranges. The mounting screws are hidden behind stylish one-piece trim rings. And because good design doesn’t age, you know they’ll look every bit as stylish when you’re still listening to them in 30 years.\u003c\/p\u003e\n\u003cp\u003eWhich, we hope, you will be.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717966487838,"sku":"907204","price":4199.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717966520606,"sku":"907277","price":4199.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717966553374,"sku":"907276","price":4199.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717966586142,"sku":"907201","price":4199.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-evoke-20-bookshelf-speakers-a68921.jpg?v=1691468599"},{"product_id":"dynaudio-evoke-10-bookshelf-speakers-pair","title":"Dynaudio Evoke 10 Bookshelf Speakers Pair","description":"\u003cp\u003ePlug them in, turn them up, and then get a friend round. We’d put money on your pal asking where’s the rest of the speakers are. That’s when you smile, shrug and invite them to sit down in the sweet-spot on your sofa. And then turn it up a bit more.\u003c\/p\u003e\n\u003cp\u003eWe’ve been creating speakers that perform out of all proportion to their physical size for over 40 years, and Evoke 10 is no exception. These are serious hi-fi… built for serious entertainment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic Dynaudio heritage… with a twist\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach speaker’s single 14cm long-throw mid\/bass driver is made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades. They use new surrounds to extend their throw, their frequency response and their low-frequency dynamics – all while maintaining stellar midrange performance.\u003c\/p\u003e\n\u003cp\u003eWant to know the woofer’s secrets? The diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil former directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.\u003c\/p\u003e\n\u003cp\u003eThe 38mm voice-coil itself is made from aluminium, making it extremely light. That means we can use more windings. More windings gives us more control over the cone’s movement, which means more control over the sound – even at high volumes and high frequencies. It’s kept stable, centred and true by the Nomex spider (the circular spring assembly that stops the cone moving when it shouldn’t, and lets it move when it should).\u003c\/p\u003e\n\u003cp\u003eAnd the whole assembly is driven by one of our new, powerful strontium carbonate Ferrite+ ceramic magnet systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCerotar: a brand-new tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUp top is the brand-new 28mm Cerotar soft-dome tweeter. Our engineers looked behind the curtain of the award-winning Special Forty and money-no-object Confidence tweeters and cherry-picked some key technologies to bring to Evoke. The headline-grabbing component is the Hexis – an ingenious inner dome that refines the airflow behind the playing surface to smooth-out its frequency response and eliminate unwanted resonances.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Cerotar, like the woofer, is powered by a powerful Ferrite+ ceramic magnet assembly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLinking the drivers together is a high-grade second-order crossover that uses the Confidence’s design with different components. So, yes, when we say you’re getting high-end tech, we mean it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHonest Danish design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvoke 10 is available in four beautiful finishes: Black High Gloss, White High Gloss, Walnut Wood and Blonde Wood. The shiny versions really are just that: new lacquering techniques have resulted in a sumptuous, almost glass-like finish. The wood versions use a tactile, open natural veneer for either a warm, dark tone or a light apricot look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou might notice that you can’t see any mounting screws. Evoke has simple, clean trim rings that emphasise the cabinet’s finish as well as the moving parts of the drivers. The rings are one-piece moulded, with the surface finish embedded in the moulding process – so what we make is what you get.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eClean, beautiful and honest. How very Danish.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt means you can take them with you when you move… and, we trust, enjoy them for a lifetime.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717966618910,"sku":"907177","price":2949.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717966651678,"sku":"907176","price":2949.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717966684446,"sku":"907104","price":2949.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717966717214,"sku":"907101","price":2949.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-evoke-10-bookshelf-speakers-a68910.jpg?v=1691468583"},{"product_id":"dynaudio-emit-25c","title":"Dynaudio Emit 25C Center Speaker","description":"\u003cp\u003eIt’s been said that the soundtrack is up to 80 per cent of the movie-going experience. And the centre speaker is the most crucial part of that. Say ‘hej’ to Emit 25C.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt could be argued that the centre channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmit 25C gets it right.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s essentially an Emit 30, turned on its side, with the mid\/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-quality mid\/bass drivers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop-end performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDanish cabinet design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEmit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Walnut","offer_id":45717966782750,"sku":"78001253","price":1349.0,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":45717966815518,"sku":"78001251","price":1349.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":45717966848286,"sku":"78001252","price":1349.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-emit-25c-center-channel-a61665.jpg?v=1691468487"},{"product_id":"dynaudio-emit-50-pair","title":"Dynaudio Emit 50 Pair","description":"\u003cp\u003eWhether you want to build a powerful stereo system, or really give your multi-channel films and music Blu-rays a boost in a medium to large room, Emit 50 has you covered.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA pair of big floor-standing speakers makes a statement. With Emit 50, you can make that statement without giving your bank manager a heart attack. Its audiophile-grade technology and tuning deliver room-filling hi-fi performance at a price-level open even to those taking their first steps into high-end sound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEmit 50 delivers a level of power and finesse that, honestly, you could pay double the price for elsewhere. But why would you? Its twin 18cm woofers, 15cm midrange driver and 28mm soft-dome Cerotar tweeter are each dedicated to producing the clearest possible performance – at true cinema-level volume.\u003cbr data-mce-fragment=\"1\"\u003eHigh-performance woofers\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLet’s give you the bottom line: Emit 50’s woofers dig deep. The two 18cm units (the same type used in Emit 20) use trickle-down technology from our high-end Evoke, Contour i and Confidence families to deliver astonishing low-frequency performance, well above the previous Emit range. It means the speaker can dig truly deep into the bass (-3dB at 33Hz, which equals Contour 60i and Confidence 60, if you’re into numbers), but allows us to keep the cabinet at a size that still fits your living room.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe one-piece cones are made from our own in-house-formulated MSP (Magnesium Silicate Polymer) material, complete with integrated dust-cap. Making drivers from one piece of material, rather than sticking on a separate piece, gives the playing surface a much better connection to the voice-coil behind it. And that means better control over their movement: less unwanted distortion and resonance, and more fine detail – even in the lowest notes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the other speakers in the series, Emit 50’s woofers use copper voice-coils. That’s because they don’t need to be quite as sprightly as they would when also handling midrange duties (as on Emit 20). So, we’ve used heavier copper for more outright punch. That’s intensified by the dual-stacked magnet system, which is optimised to direct its energy directly into the voice-coil.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated midrange driver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe midrange driver is a different beast. Exclusive to Emit 50, it’s derived from the version we used in the Evoke range – which, in turn, came directly from the high-end Contour series. It has a powerful ferrite ceramic magnet, a short version of the 38mm-diameter aluminium voice-coil (specifically optimised for midrange performance), and a lightweight surround. It’s designed for speed and precision: exactly what you need for reproducing nuanced vocals, orchestral strings and wind instruments, and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSweet high frequencies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 50’s Cerotar tweeter is the same as you’ll find in the Evoke family. It’s a ground-up design that uses key technologies developed for our award-winning Special Forty anniversary speaker, plus Confidence and even our Core range of professional studio reference monitors. Our engineers are really proud of it, and rightly so.\u003c\/p\u003e\n\u003cp\u003eCerotar’s 28mm coated fabric soft-dome diaphragm sits on top of another Dynaudio innovation: the Hexis. This ingenious dimpled inner dome is placed close enough behind the fabric to stop unwanted resonance reflecting back to the rear of the playing surface. It keeps the frequency response smooth for cleaner, sweeter treble – and more detail in your music.\u003c\/p\u003e\n\u003cp\u003eThe tweeter is powered by a powerful Ferrite+ strontium carbonate ceramic magnet to give it more sensitivity. That translates to your ears as more authentic performance – you hear what you’re meant to hear; nothing more, nothing less. And because it’s so natural, it also reduces fatigue – so you can listen for longer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClever crossover design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 50’s crossover is a hybrid design. There’s a traditional Dynaudio first-order circuit for the tweeter, a second-order design for the midrange driver, and a fourth-order topology for the woofers. Sure, we could’ve just created a single design to cover them all – but that would mean compromising performance, which is something our engineers simply won’t do.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuthentic Danish design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cabinets have been designed and tuned in-house in Denmark. They’re constructed from 18mm MDF, and damped with specially selected polyester material (yes, that’s tuned too) to make sure the drivers have the most stable platform possible.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can choose from three custom laminate finishes (Black, White, and Walnut), and black magnetic grilles come as standard. So if you want your speakers to stand out or blend in (or both), you can mix and match. It’s something you might want to think about if you’re creating a multi-channel system from scratch using Emit 50 alongside other speakers in the range.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhether you’re starting a brand-new high-end system from scratch, or upgrading from another system, Emit 50’s combination of power and finesse will bring a new level of performance to your music and films.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Walnut","offer_id":45717966881054,"sku":"78001503","price":3899.0,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":45717966913822,"sku":"78001501","price":3899.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":45717966946590,"sku":"78001502","price":3899.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-emit-50-floorstanding-speakers-a61674.jpg?v=1691468515"},{"product_id":"dynaudio-emit-30-pair","title":"Dynaudio Emit 30 Pair","description":"\u003cp\u003eEmit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you’re looking for a little more power from your system, you’ve found it. Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel (or more) home cinema.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike its little brother, Emit 10, it uses 14cm MSP woofers similar to those used in the Evoke series – this time doubled-up in each speaker for more low-frequency muscle, plus midrange clarity and punch. MSP stands for Magnesium Silicate Polymer. It’s a material we developed in-house for our woofer cones, and have used for decades – including on our most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness and damping (one we’ve tuned and honed over the years) to deliver control and outright power exactly where it’s needed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium woofer technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-performance Cerotar tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the twin 14cm mid\/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDanish-designed cabinetry\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOn the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any configuration (so if you’re mixing and matching Emit speakers in a home cinema system, you can make them stand out or blend in as you want).\u003c\/p\u003e\n\u003cp\u003eEmit 30: powerful floorstander performance in a compact package. If you want to take your listening to the next level, they’ll really make your collection sing.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Walnut","offer_id":45717966979358,"sku":"78001303","price":2949.0,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":45717967012126,"sku":"78001301","price":2949.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":45717967044894,"sku":"78001302","price":2949.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioEmit30_Walnut_01.webp?v=1691670926"},{"product_id":"dynaudio-emit-20-pair","title":"Dynaudio Emit 20 Pair","description":"\u003cp\u003eEmit 20 is a high-performance standmount speaker derived from our Evoke, Contour i and Confidence series. It gives a stellar combination of detail and punch for small to medium-sized rooms.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe don’t use the term ‘authentic fidelity’ lightly. With Emit 20, that’s exactly what you’ll get: a premium audiophile speaker that astonishes at the price. It might be an ‘entry-level’ model, but Emit 20 is still crammed with technology that you’ll find in our other families, right up to the flagship Confidence range and our Core professional reference monitors. Make no mistake: you’ll experience performance you simply wouldn’t expect at this level.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMid\/bass power and control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 20 uses an 18cm MSP (Magnesium Silicate Polymer) woofer, based on the one we’ve used in the Evoke series. MSP is a material we developed in-house, and have used for many years on our most renowned models. The cone itself is a one-piece design; the dust-cap is moulded as part of the playing surface, which gives it a solid connection to the voice-coil that moves it back and forth. You’ll hear that connection as supreme control and detail in the low and midrange frequencies.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe voice-coil itself is aluminium, wound onto a two-layer glass-fibre former. We’ve a long history of using aluminium wire in our voice-coils – and for good reason. It’s light, so doesn’t impede fine movement, and we can get more windings on the former for a given length of wire. That means more ‘BL’, or magnetic power. More power means more punch. We’ve boosted that further, too, by coating the aluminium wire in copper.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCombined with the stacked ferrite magnet system and new surround, that gives Emit 20’s long-throw mid\/bass driver all the bass power you could want, even at high volumes, combined with amazing control over midrange frequencies (where instruments such as guitars, vocals and violins reside).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-level tweeter performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 20 uses the Cerotar tweeter directly from Evoke. It’s a 28mm soft-dome design that includes the ingenious Hexis inner-dome device. The coated fabric dome delivers sweet-sounding high frequencies – all the openness and detail the artists want you to experience in their recordings – while the Hexis smooths the frequency response and reduces unwanted resonance for surprising clarity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCerotar is powered by a powerful Ferrite+ strontium carbonate ceramic magnet system. It gives the tweeter all the power it needs to play loud without breakup while maintaining all the nuance you could want. Even at neighbour-bothering levels.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd because it uses technology from our top-of-the-range Core pro reference speakers (whose users need to listen intently for long periods), you won’t get tired when you’re in the middle of a long session.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInside the crossover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mid\/bass driver and tweeter are marshalled by a custom-designed crossover from the same team who brought you Heritage Special and Core. Our engineers used a hybrid first- and second-order topology for the tweeter and woofer respectively, giving them exceptional control over each driver’s behaviour. It means you’ll hear what the artist wants you to hear, without compromise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn impressive finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 20 comes in three custom-designed laminate finishes – Black, White and Walnut – that beautifully complement the cabinets’ clean Scandinavian design (conceived in-house at our headquarters in Denmark). Black magnetic grilles come as standard in the box.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve even lavished attention on the cover-rings, which hide the mounting screws. They’re one-piece moulded with the surface finish embedded in the material, which eliminates the need for lacquer – so they won’t degrade over time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you want an audiophile-level standmount speaker for a stereo set-up in medium-size room, or fancy a little more ‘oompf’ from your rear surround channels, Emit 20 is the ideal choice.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Walnut","offer_id":45717967077662,"sku":"78001203","price":1849.0,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":45717967110430,"sku":"78001201","price":1849.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":45717967175966,"sku":"78001202","price":1849.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-emit-20-bookshelf-speakers-a61656.jpg?v=1691468471"},{"product_id":"dynaudio-emit-10-pair","title":"Dynaudio Emit 10 Pair","description":"\u003cp\u003eEmit 10 is a compact two-way standmount speaker that uses technology derived from our ultra-high-end Confidence, Contour i and Evoke series. It’s the ideal model for smaller rooms and satellite channels in a home cinema system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDesigned and engineered at Dynaudio Labs in Denmark, Emit 10 has been developed and tuned by the same minds behind our award-winning high-end families – right down to the smallest detail.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnder the hood, you’ll find a 14cm MSP (Magnesium Silicate Polymer) mid-bass unit. MSP is a material we developed ourselves, and have been using for decades. It provides exactly the right combination of lightness, stiffness and damping for super-fine control without loss of power – essential when a driver is reproducing both low-bass and crucial midrange frequencies.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLegendary Engineering\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 10’s mid\/bass driver is derived from the Esotec+ in the successful Evoke series. Its double magnet system gives better movement control and sensitivity, which means you’ll hear improved frequency response and dynamics at lower frequencies, while retaining crystal-clear midrange performance. That means you’ll hear what you want from a powerful rhythm section, plus guitars, vocals and more – all without distortion at louder volumes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou’ll notice that the dust-cap isn’t simply glued on. It’s part of the playing surface of the cone. The little dashed line around its edge – the balance rib structure – is bonded directly to the 38mm voice-coil behind it. It’s an incredibly strong connection with the motor, which means more of the coil’s motion energy is transferred to the diaphragm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBehind the Cone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe voice-coil itself is made of copper-clad aluminium wire. Aluminium is light, which gives the driver a fleetness of foot you might not find elsewhere, while the copper coating increases conductivity for more power. It’s a winning combination for detail and punch.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA high-quality double ferrite magnet system provides the power. It’s a stacked design to keep it compact, but it serves another purpose: using two magnets means our engineers were able to control the magnetic flux, directing it back to the voice-coil, where it’s needed the most. (We can’t break the laws of physics, but we do rather like to bend them a bit.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-quality Cerotar Tweeter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cerotar tweeter is exactly what you’ll find in Evoke. It’s based on the one we’ve used in our award-winning Esotar Forty anniversary tweeter and the incredible Esotar3, which you’ll hear in Heritage Special and Confidence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s a 28mm fabric soft-dome unit with our special DSR (Dynaudio Secret Recipe) coating. Why fabric soft-dome tweeters? They convey all the detail and openness you could wish to hear from your recordings without subjecting you to unwanted fatigue over longer listening sessions. These are speakers you can (and, we hope, will) listen to late into the night.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBehind the dome sits our much-talked-about Hexis device. It’s an ingenious dimpled inner dome that sits directly behind the playing surface and shapes airflow to optimise the frequency response and eliminate unwanted resonances. That means the diaphragm can move more precisely, so you’ll hear even more detail.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s driven by a strontium carbonate Ferrite+ ceramic magnet system for more sensitivity, improved clarity and a natural, dynamic response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Crossover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmit 10’s crossover was designed by the same engineers that worked on Heritage Special and our Core range of professional studio reference systems. It uses a first-order design for the tweeter and a second-order topology for the mid\/bass driver. We could’ve used a one-size-fits-all circuit, but that would mean compromising performance – and we’d much rather spend a little extra time to do it properly. We think you’ll agree when you hear them.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRound the back, you’ll see the bass-reflex port. It’s a dual-flared design to reduce air turbulence and minimise unwanted ‘chuffing’, especially with deep notes. We’ve even tuned the internal damping material (yes, that’s possible). It’s measured down to the gram for the perfect combination of damping and openness.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe cabinets are made from 18mm MDF, covered in beautiful custom laminate finishes. There are three available: Black, White and Walnut. All come with magnetic grilles, too – so if you want a different look, or someone small in your house is obsessed with poking and prodding your speakers with sticky fingers, you’re well covered.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEmit 10 is the ideal way to take your next step into the world of hi-fi. Cutting-edge technology, simple Danish design and unmatched performance at this level. What’s not to like?\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Walnut","offer_id":45717967208734,"sku":"78001103","price":1449.0,"currency_code":"NZD","in_stock":true},{"title":"White","offer_id":45717967241502,"sku":"78001101","price":1449.0,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":45717967274270,"sku":"78001102","price":1449.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-emit-10-bookshelf-speakers-1718.jpg?v=1691468192"},{"product_id":"dynaudio-focus-10-wireless-active-bookshelf-speakers-pair","title":"Dynaudio Focus 10 Wireless Active Bookshelf Speakers Pair","description":"\u003cp\u003e\u003cstrong\u003eYou know what they say about good things and small packages…\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur compact speakers have been raising eyebrows with their performance for more than 40 years. The smallest member of the Focus family will send them skyward once again.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 10 is more than just a pair of active loudspeakers. It’s a complete music system, packed from top to bottom with the technology that’s taken Dynaudio to legendary status – allied with the most cutting-edge wireless features we could think of. And we thought of a lot.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eStreaming is placed front and centre. With Spotify Connect, Tidal Connect, Apple AirPlay 2, Google Chromecast, Roon, Bluetooth and local network capabilities on board, Focus 10 can play literally anything stored in digital form, from anywhere you can access it – online or on a networked hard-drive at home. Hundreds of millions of tracks, all accessible at the touch of a finger on your phone or tablet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThanks to their built-in WiSA technology, the speakers will also connect wirelessly to a compatible TV or USB dongle – doing away with the need for bulky home cinema electronics and freeing-up space on your equipment rack for something other than yet another black rectangle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd the beauty is, it’s all so simple. Minimal set-up time, only two cables for the wall-plugs and an elegant, intuitive app to customise, set presets and more. Going from unboxing to hearing true audiophile sound has never been this quick or easy.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA new way to listen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e‘Active’ doesn’t mean one single amplifier per speaker. It means one single amplifier per driver. For Focus 10, that means two each. Why an amp for each individual tweeter and mid\/bass unit? Because that gives us more control over their performance. And that means each driver sounds as good as it possibly can, with no compromise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s all kept in check with sophisticated DSP (digital signal processing) tech. We took all the lessons we learned while creating our award-winning Focus XD, Xeo, LYD and Core ranges and produced a system that’s as effective as it is simple to use. Tell the speakers where they are in your room (near a wall, in a corner or in free space) by choosing the appropriate option in the Dynaudio app, and they’ll optimise their performance for that position. If you want to delve deeper into calibration there’s optional Dirac Live technology for completely bespoke results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEven the magnetic grille is smart. Focus 10 has specific EQ settings for when it’s in use or not (you’ll know it’s doing its thing when you see the light glow blue briefly).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThere’s brawn to go with the brains, too. With a total of 390W of class-D Pascal amplification under the hood in each speaker (110W for the tweeter and 280W for the woofer), Focus 10 is primed and ready to fill even a midsize room with high-quality sound. In fact, we’d say they pack more punch than a speaker of their size has any right to.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThere’s even an automatic failsafe system to ensure the speakers aren’t damaged when cranked to neighbour-bothering levels: a bespoke sliding high-pass filter reduces woofer excursion as the volume rises. Clever.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassic Dynaudio drivers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drivers themselves are every bit as impressive as the technology that feeds them.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUp top is a 28mm Cerotar soft-dome tweeter. It uses techniques and materials developed during the creation of our acclaimed Confidence, Special Forty and Core ranges – including the Hexis inner dome (which sits just under the diaphragm and refines airflow behind the playing surface to smooth the frequency response and reduce unwanted resonances). The optimised magnet system uses a strontium carbonate Ferrite+ ceramic design to increase tweeter sensitivity – which brings incredible detail and a sweet, natural treble response. That means an extremely low level of listener fatigue… which means you can listen for longer. Always a good thing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe 14cm Esotec+ mid\/bass driver is the best we’ve ever created in this size chassis. We created it using experience gained while developing the new Contour series – so to say it has pedigree is something of an understatement. Its new surround and improved magnet system create an extended throw length, which extends the frequency response at lower frequencies while hanging on to its stellar midrange performance. And because the box is closed, we’ve been able to extend that low-frequency performance down to trouser-flapping depths.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLooks that thrill\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFocus 10 wouldn’t be a Dynaudio speaker if it didn’t look incredible. It’s available in four beautiful finishes – Blonde Wood, Walnut Wood, Black High Gloss and White High Gloss – each developed to complement real-world living spaces.\u003c\/p\u003e\n\u003cp\u003eAfter all, not everyone wants to re-arrange their living-room around their speakers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThen there are the little touches you might not notice at first. The brushed anodised aluminium cover rings on the tweeter and mid\/bass driver. The discreet Dynaudio logo on the grille’s aluminium top. The light on the front of the speaker, which glows gently in different colours to tell you what’s happening. Even the backplate has been given special treatment.\u003c\/p\u003e\n\u003cp\u003eFocus 10 is true Danish high-end hi-fi, made wireless. If your raised eyebrows had eyebrows, they’d be raised as well. It’s time to listen to something new…\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Black High Gloss","offer_id":45717969207582,"sku":"971176000","price":9799.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717969240350,"sku":"971104000","price":9799.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717969273118,"sku":"971101000","price":9799.0,"currency_code":"NZD","in_stock":true},{"title":"White High Gloss","offer_id":45718546055454,"sku":"971177000","price":9799.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-focus-10-active-wireless-speakers-a69046.jpg?v=1691468742"},{"product_id":"dynaudio-focus-50-wireless-active-floorstanding-speakers-pair","title":"Dynaudio Focus 50 Wireless Active Floorstanding Speakers Pair","description":"\u003cp\u003e\u003cstrong\u003ePerhaps the world’s most advanced active wireless hi-fi system\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFocus 50 is the pinnacle of wireless hi-fi. All the convenience of a consumer speaker system with all the heavyweight credentials of our most prestigious hi-fi speakers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 50 is an active wireless stereo speaker system brimming with connectivity. If you want to fill your room with true audiophile performance without also filling it with cables, boxes and racks, this one is for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConnect over the air via Apple AirPlay 2 from your MacBook, iPad or iPhone; with Google Chromecast from your Android phone, tablet or Chromebook; using Spotify Connect or Tidal Connect from… well, anything with Spotify or Tidal on it. Hook up with Roon; stream via Bluetooth. You can even connect your physical digital sources via coaxial or optical digital inputs, your analogue ones (including turntables, 8-track machines and Edison Concert Phonographs) via line-in or a compatible adaptor, and your networked devices via Ethernet or Wi-Fi.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhat does that mean? Effectively, that if it’s been released as a recording, you can listen to it. All of it. And hi-res heaven is only a smartphone swipe away.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 50 is designed for living rooms, not sterile listening caves. It’s built for those who want to share amazing sound with their loved ones (invite them over and get them connected… but good luck getting them to leave again). That’s why we’ve also built-in WiSA streaming. Focus 50 can connect wirelessly to your TV (and therefore anything else connected to it) and take the place of a hulking AV receiver\/cable tangle\/equipment stand combination. The only downside? Your cat won’t be able to warm itself on the amp any more…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple set-up, powerful performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’d be amazed if it took you longer than five minutes to go from unboxing to listening. Just plug the speakers into the mains, launch the accompanying Dynaudio app, follow the guided set-up instructions (which gets you connected to your network and helps you optimise your speakers), and that’s it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 50 only needs two cables: one for each power plug. That’s because its amplifiers are built in. And not just one amplifier per speaker either – each individual driver has its own amp, specifically tuned and optimised to work with that exact unit. No compromising with one-size-fits-nothing amplification, no hassle with component matching, no cables gathering dust. It’s a tailored system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach speaker has three class-D amplifiers on board: one 110W unit for the Cerotar tweeter, a 280W amp for the neodymium midrange driver, and one 280W amp for the twin Esotec+ bass drivers (which are driven in parallel). They all come from our partners at Pascal in Copenhagen – the same company we’ve worked with to create the power plants for our mighty Core professional studio systems. Peak power, you ask? A whopping 1000W. The Focus 50s – and your ears – are in good hands.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll that power is marshalled by sophisticated DSP (digital signal processing) technology – the same type we use in our Core and LYD pro ranges. During set-up in the app, tell the speakers where they are in the room (near a wall, in a corner or in free space) and they’ll optimise their performance for that position. And if you (or an installer) want to take calibration to the next level, there’s optional Dirac Live tech for total customisation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve even included custom EQ presets that take into account whether or not the magnetic grille is installed… and you don’t have to do anything to activate them (besides installing said grille, of course). Auto-sensing technology in the speaker understands when the grille is on or off – and the ‘Y’-shaped light briefly glows blue to let you know that it knows. Ingenious.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd to prevent speaker damage at high volumes, we’ve designed a custom sliding high-pass filter that reduces woofer excursion as the level goes up. (Although your neighbours will probably be banging on the wall long before that happens.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTraditional Dynaudio expertise\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’re always excited to be able to use new flagship hardware across our range. Focus 50 draws heavily from techniques and technologies used in our high-end Contour and Confidence passive hi-fi families.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor example, the soft-dome Cerotar tweeter uses the Confidence’s Hexis inner dome. It’s a clever extra part that sits just behind the playing surface to optimise airflow and minimise unwanted resonances. Sitting behind it is a strontium carbonate Ferrite+ magnet system to maximise sensitivity. In English, that means sweeter, clearer treble, which is easier to listen to for much longer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eComplementing the tweeter is a dedicated midrange driver (the only one in the Focus range), derived from the award-winning Contour 60. It’s a 15cm unit with a powerful neodymium magnet, a glass-fibre voice-coil former and a trademark Dynaudio aluminium voice-coil. This fleet-footed unit uses lightweight magnet and coil materials to give it more agility while maintaining a tight grip on midrange frequencies. And for you, that means Contour-level performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHandling the bottom end is a pair of 18cm Esotec+ woofers. They use trickle-down tech from both Confidence and Contour to deliver tight, powerful bass. Unlike other Focus models, however, there’s a copper voice-coil sitting inside the Ferrite+ magnet. That’s because, as a pure bass driver, this driver doesn’t need to reproduce agile midrange tones – and so can have more moving mass. Power and control are front and centre.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo gimmicks, no nonsense – just clean, stylish Danish design and craftsmanship. From the anodised brushed aluminium cover rings around the drivers, to the subtle Dynaudio logo atop the speaker grille, and the gently glowing light (which changes colour to let you know what the speaker is doing) we’ve made sure Focus 50 looks the part when sitting in a real living space.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRun your fingers over the beautiful open-grained Blonde Wood and Walnut Wood finishes, or marvel at the glassy High Gloss Black and High Gloss White lacquer. Take in the shape of the gently tapered cabinet. Even the backplate has been given special treatment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 50 is the ultimate premium wireless hi-fi system. True audiophile quality with all the benefits of modern digital streaming technology. It’s time to listen to something new…\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717969305886,"sku":"971377000","price":19499.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717969338654,"sku":"971376000","price":19499.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717969371422,"sku":"971304000","price":19499.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717969404190,"sku":"971301000","price":19499.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-focus-50-active-wireless-speakers-a69058.jpg?v=1691468781"},{"product_id":"dynaudio-focus-30-wireless-active-floorstanding-speakers-pair","title":"Dynaudio Focus 30 Wireless Active Floorstanding Speakers Pair","description":"\u003cp\u003e\u003cstrong\u003eHi-fi quality with consumer convenience… the perfect combination\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBe bold… Listen alone. Listen with friends. Listen to old favourites or something surprisingly ‘not you’. Listen to music. Listen to your TV. Listen to your turntable and millions of hi-res online tracks. Listen without cables. Without having to leave your seat. Without limits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 30 gives you access to everything that’s ever been recorded and put online. These compact floorstanding speakers are loaded with futureproof streaming technology and connectivity to bring a new world of audiophile-quality music directly to your living room.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd when we say ‘loaded’, we mean it. With Spotify Connect, Tidal Connect, Apple AirPlay 2, Google Chromecast, Roon, Bluetooth and local network connectivity on board (and with the capability for even more), Focus 30 will accept streaming audio from any compatible device. That could be a laptop, a phone, a tablet, a network-attached storage device… even a smart watch. If your content is stored in hi-res, your ears are in for a real treat.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd if you have a bunch of equipment from your previous system, you can keep using it. A full set of digital and analogue connections on the rear panel means you can use your CD player or turntable alongside Focus 30’s built-in streaming smarts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve thought of TV owners, too. If you don’t want the bulk of a full AV receiver, equipment rack and cabling in your living room (maybe you’d like to have something a little more attractive under your TV – like a bookshelf, or your dog), Focus 30 has you covered. Its built-in WiSA technology connects wirelessly to a compatible TV or USB dongle to bring its audio seamlessly to your speakers. No clutter, no fuss.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBehind the music\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFocus 30 has more than 40 years of acoustic expertise to back-up its technological wizardry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIts drivers are classic Dynaudio: a Cerotar soft-dome tweeter with the ingenious resonance-defeating, frequency-smoothing, fatigue-busting Hexis device – plus twin 14cm MSP Esotec+ mid\/bass units. What could be more familiar?\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Cerotar tweeter is based on the range-topping Esotar 3 you’ll find in our Confidence range. It uses a strontium carbonate Ferrite+ magnet system, optimised for airflow, to increase sensitivity. In practice that means clear, sweet, detailed treble that’s easy to listen to… perfect for listening late into the night.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Esotec+ mid\/bass units are made from MSP (Magnesium Silicate Polymer), a material we developed ourselves and have been refining and using for four decades. It provides exactly the right combination of lightness, stiffness and damping for incredible control over midrange and low frequencies. Couple that with a lightweight aluminium voice-coil (for more accuracy, control and finesse) and an improved magnet system that generates more driver excursion (for lower, punchier bass and more midrange clarity) and you’ve a formula for addictive, toe-tapping performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd the closed-box cabinet design lets us take full advantage of the powerful amplification and DSP (digital signal processing) on board – marrying the extreme low-frequencies, the expressive midrange and soaring treble in exciting new ways.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrains and brawn\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFocus 30 is active, which means each individual driver is powered by its own amplifier. There are three amps in each speaker – each one tailored to the driver it’s paired with. It means we can zero in on that particular driver’s strengths, bringing them out without needing to compromise for other frequencies. The tweeter has a 110W amp, and each mid\/bass driver has its own 280W powerhouse.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe’ve used high-quality class-D amps from our partners at Pascal in Copenhagen. We know each other well: our flagship pro speaker series, Core – used in some of the world’s top studios – also uses Pascal amps. We think you’ll agree that being able to draw a sonic line directly from the artist to your living room is something rather special.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat line continues through the DSP. As with our pro speakers, you can tell Focus 30 where it’s sitting in your room (near a wall, in a corner or in free space) via a simple switch in the companion Dynaudio app and it will optimise itself to sound its best in that position. There’s even optional Dirac Live integration for a deep-dive into calibration – and completely customised results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe speakers even know when they’re wearing a magnetic grille or are standing in their birthday suit – and they’ll optimise themselves accordingly. And they’re constantly keeping an ear out for the kind of volume levels that could cause damage to the drivers and amp; a custom sliding high-pass filter rolls off the bass at high volume to keep everything balanced. In practice, that means you get deeper bass at lower volume levels – and you can push the speakers louder overall (your neighbours can thank you later).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eObjectively beautiful\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome active systems look like weird creatures from the future… but who wants a couple of spiky novelties peering back at them in the living room? With Focus 30 we’ve stuck to what we do best: simple, stylish, timeless Danish design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe studied interior design trends and tailored the whole product family for real-life rooms and real people. You’ll get top-quality cabinetry, glorious fit-and-finish (check out the anodised brushed aluminium cover rings and discreet Dynaudio logo on the grille), and four furniture grade finishes (see below). Just as you’d expect from a high-end hi-fi system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFocus 30 isn’t just a pair of active speakers. It isn’t yet another copycat wireless system. It’s so much more – a true audiophile-grade game-changer. It’s time to listen to something new.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White High Gloss","offer_id":45717969436958,"sku":"971277000","price":14749.0,"currency_code":"NZD","in_stock":true},{"title":"Black High Gloss","offer_id":45717969469726,"sku":"971276000","price":14749.0,"currency_code":"NZD","in_stock":true},{"title":"Blonde Wood","offer_id":45717969502494,"sku":"971204000","price":14749.0,"currency_code":"NZD","in_stock":true},{"title":"Walnut Wood","offer_id":45717969535262,"sku":"971201000","price":14749.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-focus-30-active-wireless-speakers-a69051.jpg?v=1712787510"},{"product_id":"dynaudio-contour-20-black-edition-standmount-speakers","title":"Dynaudio Contour 20 Black Edition Standmount Speakers","description":"\u003cp\u003e\u003cstrong\u003eContour 20 Black Edition is the apex of 40 years of Contour.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery component has been taken and upgraded. Every nuance improved. And every surface made black.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeights of perfection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGood engineers aren’t happy unless they’re unhappy. Not in an existential way; more that it means they’ve found something they want to improve, and the solution is nagging at them. (Although sometimes, of course, that can definitely skirt the edges of an existential wobble…)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey went through it in 2016 when Contour was revamped into its current look. It happened again in 2020, when the family gained the ‘i’ badge after being perked-up by a raft of trickle-down Confidence tech.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd they went through it once more in the months before the first Contour 20 Black Edition rolled off the production line at the factory in Denmark. During development this time, their unhappiness made them extremely happy, because they got to throw the kitchen sink at it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBox: clever\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContour already had a brilliant foundation. The cabinet construction is stellar: thick, solid and with a shape that minimises unwanted vibrations and standing waves. And the heavy aluminium baffle (which is actually a lot thicker than it looks) does wonders for increasing stability and eliminating diffraction.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSo, how does one improve on the rest? By reaching into the bag of tricks Dynaudio Labs has been filling up since 1977 and plucking out the best bits of the best bits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh spirits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFrom the top: high frequencies are handled by the Esotar 3 tweeter. It comes directly from the flagship Confidence range – and is, quite simply, the best tweeter Dynaudio has ever produced. (So far.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe soft-dome diaphragm is finished with a DSR coating. It’s a high-precision method, formulated and mixed by hand and applied by robots, that puts the coating at the exactly right density in exactly the right places, so the listener hears exactly what they’re supposed to hear. Which is exactly what the artist wants. (And while Dynaudio isn’t allowed to disclose exactly what the DSR coating is, they can share what the acronym stands for: Dynaudio Secret Recipe. So now it's known.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStabilising influence\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDirectly behind the diaphragm sits the Hexis. This ingenious little dimpled dome sits behind the main diaphragm. It can just about be seen in the right light. It might even be called camera-shy. But it performs something extraordinary, back there in the dark.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt helps the tweeter breathe. It helps the music breathe.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Hexis smooths out the tweeter’s frequency response and reduces unwanted resonances – the kind that colour music – by gently guiding the moving air behind the fabric dome. It channels the flow in exactly the right way in and out of the conduit system in the rear chamber behind the magnet. The movement is minuscule – only fractions of a millimetre – and it happens tens of thousands of times a second.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt means high frequencies are heard with all the emotion intended. The sharp attack of a well-rosined bow on a cello string as the player digs in. The epic, soaring crescendo of the first violins. The cocksure sizzle of the hi-hats as the drummer counts in.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDo it a favour: shine a torch onto the tweeter and give it a nod of thanks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir marshal\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn the way-back there’s a labyrinth of conduits, shaped vents and more. There’s a large rear chamber to reduce resonance, improved damping, and the super-strong neodymium magnet and lightweight aluminium voice-coil complete the all-star team.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEsotar 3 is more sensitive than previous models, which means it can react with a lower input voltage, which means it doesn’t get hot as fast. And that means it can play louder, with amazing clarity, for longer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s one of the cornerstones of modern hi-fi.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA sensitive type\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe mid\/bass driver is something rather special.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf it were an engine, it would be supercharged, turbocharged, and quite possibly have an auxiliary rocket fitted too. The super-powerful neodymium magnet gives a boost to what’s already a powerful ferrite unit in Contour 20i, and the extended voice-coil winding improves excursion linearity. And because the magnet is smaller, there’s more space for the kind of air movement desired inside the slim cabinet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOverall, the driver is more sensitive (so there’s less stress on the amplifier) while bass extension is maintained (normally affected by higher sensitivity). Here, it’s the best of both worlds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe listener's ears will notice it, too: more attack and better imaging.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe rest of the driver is classic Dynaudio: a one-piece MSP (Magnesium Silicate Polymer) cone, directly anchored to the extended aluminium voice-coil via its moulded balance ribs; a glass-fibre voice-coil former for reducing eddy currents (and improving agility); and optimised ventilation. It’s a formula that’s trusted across the hi-fi world – and even into professional studios.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll of it, of course, tested, tweaked and perfected using a combination of Dynaudio’s world-class Jupiter measuring laboratory and world-class outer-, middle- and inner-ears.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePort authority\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe new woofer has been designed to work seamlessly with the new bass port.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYes, from the outside it just looks like a hole in the back of the speaker with a tube going inside. But it isn’t as simple as grabbing some plumbing from the DIY shop down the road. If only…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContour 20 Black Edition has a new port, bigger than what’s seen on Contour 20i. It’s flared in a specific way at both ends (inside and out), which helps to control air movement for better precision, fewer artefacts, and vastly improved low-bass performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd it looks rather nice, too. It took a lot of work (both for the mechanical engineers and the product designers) to integrate it perfectly with the cabinet’s graceful curves.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore than the sum of its parts\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe crossover has been given the all-star treatment, too. Contour 20i already had an incredible unit – which makes things difficult. How does one upgrade an upgrade?\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBy going back to the beginning and starting again. Contour 20 Black Edition has a brand-new crossover using the smallest amount of components manageable – and the best versions of those parts. Mundorf capacitors and resistors, a gigantic air-coil and top-quality internal cables have been used. It’s a second-order topology for both drivers – so there’s no correction circuitry necessary. For those who want purity, here it is…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat simplicity can be heard, too. Directivity is tightly controlled, thanks to the smooth power response. And that means a precise, focussed performance – with no detail left unrevealed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack magic\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSome manufacturers give options for their Black Edition products. That seems weird to Dynaudio, so they decided to follow the lead of one of the twentieth century’s greatest poets, Nigel Tufnell. In 1984, he asked: “It’s like, how much more black could this be? And the answer is none. None more black”.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCabinet? Black. Woofer basket? Black. Tweeter front plate? Black. Terminal plate? Black. Anodised aluminium baffle? Black. Bass port? Black? Cabinet? Black.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s an investment in sound. An investment in a music collection. And – frankly – it’s pretty damn cool.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":50651423801630,"sku":"976376","price":13749.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-countour-20-black-edition-standmount-speakers_4000x.progressive_7d04d09a-302c-4f42-925b-961a24bfc845.webp?v=1772111161"},{"product_id":"dynaudio-contour-legacy-limited-editiion-floorstanding-speakers-walnut-veneer","title":"Dynaudio Contour Legacy Limited Edition Floorstanding Speakers","description":"\u003cp\u003e\u003cstrong\u003eSit on the floor. Lean back against the chair with the liner-notes in your hands. Close your eyes and listen like you used to.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContour Legacy is part of the Dynaudio Heritage Collection. It’s all about music, well listened-to. Sturdy quality. Nostalgia. It’s a loud strum of your heartstrings – and each of the 1000 limited-edition pairs has been proudly handmade in Denmark by Martin, Anne, Daniel, Claus and Kamil… just for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt remasters Dynaudio’s greatest hits – including modded Evidence Platinum woofers, the legendary Esotar 3 tweeter and a crossover that can only be described as an artisanal masterpiece. (Can you tell we’re proud?)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRun your hand over the sustainable American Walnut finish; marvel at the mitres, precision-cut to tiny fractions of one degree; stand back and take in the fact these friendly-looking speakers are packed with the most up-to-date audio technology available. (Then realise that the most old-fashioned thing about them will probably be the music you play!)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt's OK, though. We’re with you there: old’s cool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemastering a Classic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContour Legacy is an intentional homage to the late, great Contour 1.8 – and, like its muse, it has that… ‘Something’. That reassuring sense of pride and craftsmanship that is, perhaps, less common in the world these days.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSo, you might already be expecting a listening experience that’s a trip down memory lane. Or Penny Lane.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut no. It’s better than that. This is a memories upgrade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBeneath that chocolate brown American Walnut veneer lives a totally different generation of technology. The original drivers and electronics from the elder Contour have been replaced by components that look superficially familiar, but sound substantially better.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs a Contour Legacy owner, you have permission to feel nostalgic but modern – whether you’re streaming or lowering a stylus. Go ahead. Invite someone from the white plastic earbuds generation to take a listen. Watch them go into in a flow state, track after track, losing track of time and what they’d promised to do with it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOr make a point of inviting nobody, sit down in your sweet-spot and remind yourself what pure indulgence sounds like.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA marriage made in Skanderborg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery left and right Contour Legacy loudspeaker is, like a swan, paired for life. It has a partner, from the moment its components are carefully placed on our workbench in Jutland.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach panel of each cabinet is made from a composite board made from the same source, chosen as if it were a vineyard for a domaine. It’s faced by a layer of sustainable, tactile, warm American Walnut. Martin – a man with twenty years’ experience of making Dynaudio speakers – selects these panels, two by two, so that their grain looks similar. It can only be done by eye.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt’s a labour of love, and a process that would be unfathomable to have replicated by some anonymous robot in some anonymous factory.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat robot wouldn’t clamp each joint bonded by our Glue Master, (yes, that’s his real title). It wouldn’t be concerned about the precision of the joints, cut to fractions of one degree. Or the effect the weather will have on the integrity of the jointed angles (our humans make sure all their glueing is finished by the end of the day to stop any unwanted changes).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt wouldn’t reject a pair of speakers because one of them had a blemish almost invisible to the naked eye.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA robot wouldn’t sense the feeling you get as you run your fingers over a tiny groove in the front facing panel. It wouldn’t take pleasure in the smell of hardwood, as the doors to the workshop are opened, early morning, at the same time as laptops.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMaking a pair of Contour Legacy loudspeakers is time consuming – and even slightly obsessive, with a magical result that certain people appreciate.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike all Dynaudio speakers, that obsession extends to the bits you can’t see, or rarely look at. Like the dual-flared bass-ports, which gently control airflow and bass response, or the heavy, stable cast-iron base. No sticky-out feet here.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur sound engineers had two demanding critics to impress. Their ears.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDynaudio sound engineers don’t see playing homage to a classic as a good reason to get out of bed. They need a challenge. And, in the Contour Legacy, they got it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSince the original Contour, speaker cabinets in general have gradually become fancier. Specifically engineered to a degree you might imagine happening in a Formula One team. Maybe not wind-tunnel-tested (although that has given us a few ideas), but definitely subject to exhaustive analysis.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCurves and bends have found their way into the shapes of modern Dynaudio speakers, shaping and controlling pressure-waves, reflections, refractions… smoothly guiding sound to its smiling, satisfied destination.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBut part of what makes the Contour Legacy so comforting and familiar is its old-school, rectangular format. So, how did our R\u0026amp;D team get around this obstacle and still deliver such outstanding results?\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey modified the woofers from the Evidence Platinum, placing them in parallel, with the lower one increasing the sensitivity of its upper neighbour – so the upper driver handles midrange and bass, while the lower one just handles bass. Which meant they needed to design a higher impedance voice coil. Which meant no crossover was available off the shelf to orchestrate this idiosyncratic selection – so the team designed one from scratch, including capacitors and connecting wiring from Europe’s finest manufacturers, including Duelund, Mundorf and Van den Hul. (Our engineers do rather love that kind of snowball effect.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThen they crowned it with our legendary Esostar 3 tweeter. A tweeter that needs no introduction here.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFrom concept to engineering model to verification and prototypes – with all the tweaking and modification in between – Dynaudio sound tuners spend approximately two weeks listening per iteration.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn fact, around 70 per cent of the modifications to a loudspeaker such as Contour Legacy are done as the result of listening, rather than looking at data.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAlthough when they do get that data, they do it in style. Our Jupiter measurement facility is one of the largest in the world – and plays a crucial role in steering our speakers’ development. It accomplishes in 20 minutes what could easily take days using more conventional (and less accurate) methods. Which means we can spend more time listening…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBehind closed doors – with a source, a DAC and an amp used for all our sound tests – our team plays music from heavy metal to Mozart, Kylie to Columbian flute.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAt the end of the day, regardless of a loudspeaker’s raison d'être, it’s in the sweet spot where the real verdict is made\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnd that’s where the Contour Legacy will leave a lasting one.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":50651423965470,"sku":"900102","price":23499.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/dynaudio-countour-legacy-floorstanding-speakers_4000x.progressive_84283fbb-e78e-4cc3-a3c7-7cfb8e54b0b7.webp?v=1772110716"},{"product_id":"dynaudio-stand-10-speaker-stands-pair","title":"Dynaudio Stand 10 Speaker Stands (Pair)","description":"\u003cp\u003e\u003cstrong\u003eStability, safety and support for your speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminium Dynaudio Stand 10 provides a stable platform designed to match Dynaudio's range of compact loudspeakers from the Emit M10 to the Excite X18. It includes built-in cable-management, a compartment for sand and an innovative tool-free adjustable spike design – plus non-stick rubber pads to support your speakers. And we mean literal support: you can tilt the stand by up to 10 degrees without risking a toppling catastrophe. Stand 10's design beautifully complements the clean lines of Dynaudio's latest speakers, and its black or white powder-coated finishes will suit any room.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePractical features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStand 10 includes a sand compartment at the front, and is delivered with a plastic bag to facilitate filling the stand with sand, without spilling. At the back of the column, there is a cable compartment, with a large cutout at the top to allow the user to run for instance power cables and signal\/speaker cables through the stand. The base is mounted with rubber rings to be used when placing the stand on hard floors. Stand 10 spikes are inserted from the bottom, and can be easily adjusted via the large included finger nut.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVisual features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStand 10 is an aluminum design, with a nice structured paint. The shape of the column and base plate matches the design language of newer Dynaudio speaker lines. The logo is integrated in the casting, providing a nice looking and long-lasting impression, compared to a stick-on logo. Stand 10 is available in black and white satin finishes.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Satin Black","offer_id":50651424522526,"sku":"45241022","price":639.0,"currency_code":"NZD","in_stock":true},{"title":"Satin White","offer_id":50651424555294,"sku":"45241023","price":639.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/files\/DynaudioStand10BlackBack_4000x.progressive_a94fb6f8-0ca0-42f9-bddc-af6d73832ff4.webp?v=1772110901"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/3755\/9070\/collections\/2560px-Dynaudio_logo_svg.png?v=1724034181","url":"https:\/\/www.magnumsound.nz\/collections\/dynaudio.oembed?page=2","provider":"Magnum Sound and Vision","version":"1.0","type":"link"}