Pro-Ject Xtension 10 Evolution Turntable

Not yet rated Write a review
Pro-Ject Audio
Product Code:
Xtension 10
Check with us for availability

Available Options

Authorised Brand Dealer

Created with sketchtool.


Quality build

The Pro-Ject Xtension 10 chassis is very unique in it's design. Made of high density MDF, the plinth is then filled with metal sand, allowing the base to have a high mass that is non-resonant. 

Magnetic, floating feet decouple the main plinth from its base. This, combined with a weighty 22 kg total turntable mass result in a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles.


The platter

Instead of a generic turntable design of pure aluminium or steel, we’ve found the perfect alloy for the for the main platter of the Pro-Ject Xtension 10 Evolution. Damped on the inner side with Sorbothane® to reduce vibrations, our design also pushes the envelope with the inclusion of an in-built recycled Vinyl mat on the surface. 

The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs silently on an inverted ceramic ball bearing with magnetic suspension and is ideal for coupling a record directly on its surface.


The 10" Evolution tonearm

The Pro-Ject 10” Evolution tonearm in stunningly designed. Featuring a ‘high-mass’ base that is isolated from the main board by a sheet of Sorbothane®. 

To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams, the Pro-Ject Xtension 10 Evolution comes with a set of 4 different Sorbothane®- damped counterweights. 

We offer a premium 5pin > RCA unbalanced arm cable with all high-end turntables.



  • Super-heavy 22 kg belt drive turntable
  • Mass loaded magnetic floating subchassis
  • Precision balanced sandwich-platter
  • Inverted ceramic ball bearing with magnetic support
  • Heavy weight record clamp
  • Extremely low level of natural resonance
  • Perfect decoupling through magnetic feet
  • Electronic speed control 33/45/78 Upm
  • Tonearm 10cc Evolution made from carbon fibre
  • Inverted tonearm bearings (ABEC 7 quality)
  • Phono cable included: 5pin > RCA or 5pin > XLR





33 / 45 / 78 Upm (Speed Box DS built-in)

Acrylic dust cover


Pro-Ject tonearm cable included

Connect it 5P-C > RCA
Alternatively with no upcharge: 5P > XLR

Aluminium feet

Magnetic supported & Sorbothane damped

Turntable main bearing damping

heavy weight metal block

Max. speed variance


Max. wow and flutter

±0,01% Max.



Platter weight/diameter


Effective arm length / overhang

254mm / 16mm

Effective tonearm mass


Tracking force range


Cartridge weight range

from 4 - 14g (4 different counterweights included)

External power supply (prim/sec)

220 - 240V/50Hz / 15V/1.000mA DC

Power consumption


Dimensions lid closed (lid open)

480 x 235 (495) x 400 (535)mm WxHxD