iFi DC Blocker

 

The amplifier is the heart of your system.

If you have a mechanical hum, deploy the DC Blocker.

 

Got big amplifier. Bye bye mechanical hum.

Many large amplifiers have a really annoying mechanical hum (emitted from the toroidal transformer itself).

You can hear it when you place your ear close or next to the chassis.

This is caused by a small amount of DC voltage in the mains which makes its way through to the mains transformer, it will become ‘saturated’ and start to hum like a trooper.

The DC Blocker is a clever device that you place at the IEC (at the rear power inlet) and as its name implies, it stops DC from getting into the amplifier. It therefore eliminates amplifier transformer hum.

 

Cute. Clever.

All the benefits of cutting out annoying hum with no drawbacks.

• Intelligently stops any DC voltage from the mains to eliminate transformer hum
• EMI shielding is retained
• Equipment safety is unaffected

 

Behind every good component is a DC Blocker.

The bigger the amplifier, usually, the larger the toroidal which is susceptible to residual DC voltage. JUst add the DC Blocker at the IEC to stop DC from getting in.

• 90-240V
• Maximum rating >10A, continuous current rating 7A
• Small size, universal application, won’t block any other connectors, sockets, or cables

 

Specifications 

 

ZERO DC Block technology

Blocks incoming DC – up to 1,200mV

Voltage rating

90 – 240 volts

Maximum current rating

> 10A

Max amplifier power

1750W or VA

Continuous current rating

7A

Universal IEC

Hospital-grade IEC connectors

Dimensions

68 x 37 x 32 mm / 2.7” x 1.5” x 1.3”

Weight

63g / 2.2oz