Thorens TD 201

Not yet rated Write a review
Product Code:
TD 201

Available Options

Authorised Brand Dealer

Created with sketchtool.

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.



Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.




Turntable section

Drive System: Belt Drive

Motor: DC Motor

Speed: 33 1/3 RPM, 45 RPM

Rotation Speed Variation: +/–2%

Wow and Flutter: 0.2%

Signal-to-Noise Ratio:

67dB or higher (A-weighted, 20kHz LPF)

60dB or higher (unweighted, 20kHz LPF)

Platter: Aluminum

Die-cast Diameter of Platter: 12", 300mm


Tonearm section

Type: Static Balance, Straight

Effective Arm Length: 8.8", 223.6mm

Stylus Pressure Range: 0 to 4g

Supported Cartridge Weight: 3.5 to 6.0g

Overhang: 18.6mm

Anti-skating Adjustment: Supported


Cartridge section

Type: MM type (Audio-Technica AT3600)

Stylus Construction: Bonded Diamond

Frequency Response: 20Hz to 20kHz

Channel Separation: >18dB

Channel Balance: 2.5dB

Vertical Tracking Angle: 20 degrees

Supported Load Impedance: 47k ohms

Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)

Stylus Pressure: 3.5g +/–0.5g

Cartridge Weight: 5g +/–0.5g

Head-shell Weight: 10g (including Screws, Nuts and Wires)


Analog Output

Connector: RCA Pin jack (Gold-plated)

Power: AC 100 to 240V, 50/60Hz

Power Consumption: 1.5W (less than 0.5W at Standby)

Overall Dimensions (W x H x D): 420 x 355x 121mm

Weight: Approx. 3.9 kg