Audio Technica AT-LPW50PB Fully Manual Belt-Drive Turntable

$899.00
In Stock with Magnum Sound
This item is in stock at Magnum Sound and Vision and will ship the same day or the next business day.
Qty
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

AT-LPW50PB

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

 

Stunning Look, Stunning Sound

Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.

 

Designed for a Higher Level of Listening

The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½"-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

 

Over 55 Years of Analogue Excellence

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminium platter with rubber mat
  • AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish
  • High-isolation, height-adjustable feet
  • Built-in switchable phono preamplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Type

  • Belt-drive manual turntable

Motor

  • DC servo with Active Speed Stabilization

Drive Method

  • Belt drive

Speeds

  • 33-1/3 RPM, 45 RPM

Turntable Platter

  • Die-cast aluminum

Wow and Flutter

  • < 0.15% WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio

  • >60dB

Output Level

  • Pre-amp "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain

  • 35 dB nominal, RIAA equalized

Power Supply Requirements

  • 100-240 V, 50/60 Hz, 0.5 A Max.

Dimensions

  • With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H

Weight

  • 5.56 kg (12.26 lbs.) without dust cover

Accessories Included

  • Dust cover
  • Platter
  • Turntable mat
  • Drive belt
  • Counterweight
  • AT-HS4 headshell
  • AT-VM95E stereo cartridge (black)
  • 45-RPM adapter
  • RCA audio cable (approx. 1.0 m (3.3'))
  • AC adapter (approx. 1.5 m (4.9'))
  • Dust cover hinges

Tonearm type:

  • Static balanced straight carbon tonearm

Effective arm length:

  • 223.6 mm

Overhang:

  • 18.6 mm

Tracking error angle:

  • <2 degrees Applicable cartridge weight: 12-17 g

Stylus pressure adjustment range:

  • 0-3 g Replacement Stylus: AT-VMN95E BK

Audio & Video Installation

Listen to the music you love anywhere in your home, inside or out. Simple, easy to use solutions designed to sound beautifully!